The Basics Installing fences around one’s property can be a tedious task, regardless of the ground needed to be covered. Ideally, one should call the professionals for such a task. However, if you are adamant to build a fence yourself, we are here to help you out. There are various ways in which one can go about building a fence.
Keeping all of this in mind, there are various questions one must know the answer to in order to go about building the right type of fence. Firstly, what would the fence accomplish; its function. Secondly, one needs to know the correct style required in order to accomplish said function. Thirdly, the type of fencing, and its subsequent spacing has to go well with the architecture of the user’s house or home.
Brief Legality After knowing the answers to these questions, a few other things must be discussed. The fencing must be in accordance to the lining of the user’s property and not encroach upon the neighbor’s. The user must also know if there are any underground facilities which would hamper the installation of the fence. Zonal district laws may also be an obstacle when it comes to the sizing of the fence. The user must therefore check with the neighborhood association before going about the fencing process. Lastly, the user must apply for a building permit in accordance to the laws of the area or district.
Technical Issues A proper measurement must be used so that problems do not arise later when the fence is being laid. This is easier if preassembled fences are used as they can be cut into smaller sizes if the fencing is oddly sized. If a slope is encountered when laying the fence, there are two methods to deal with this. One of them is the step method and the other is the parallel method. The step method makes sure that the bays are equally sized when the fence is laid. The parallel method requires a bit of extra work in ensuring that the fence panels are of the same size.
Using a power auger, holes must be dug which are6 inches deeper than the required size and almost a feet in width. The user must be aware of the heights of the posts. Panels must be attached to the posts using galvanized screws of 18d or 20d width. When it comes to the gate, this is the part which will endure the most damage. So, high quality hardware must be used in its construction. A well-built frame and secure gateposts must be used to guarantee that the gate is capable of bearing the most wear and tear.
It is recommended that unless the user is completely sure of laying the fencing, a qualified company is hired for doing the same. Fenceinstallation1 is one such company which can be hired for the job. It is a fence installation contractor which has been operating for quite a few years. For more information click here or visit their website at www.fenceinstallation1.wixsite.com to have a look at the Fence Installation 1 Wix Site.